PS-832: 8 Volt 3.2 AH Rechargeable SLA Battery

PS-832: 8 Volt 3.2 AH Rechargeable SLA Battery
Click to enlarge
Price: $19.99
Product ID : PS-832
Manufacturer: Power-Sonic
Weight: 1.80 lbs
E-mail to a friend | Add To Wish List



Rechargeable Sealed Lead-Acid Battery
General Specifications
5.29 inches
134 millimeters
1.42 inches
36 millimeters
2.49 inches
63 millimeters
Height over Terminals
2.70 inches
69 millimeters
Approximate Weight
1.90 pounds
0.86 kilograms
Quick disconnect tabs (0.187" x 0.032")
ABS Plastic
Electrical Specifications
Nominal Voltage:
8 Volts (4 cell in series)
Nominal Capacity:
20 hour rate
(160mA to 7.00 volts)
3.2 AH
10 hour rate
(300mA to 7.00 volts)
3.0 AH
5 hour rate
(540mA to 6.80 volts)
2.7 AH
1 hour rate
(2100Ma to 6.00 volts)
2.0 AH
Energy Density (20 hour rate)
1.37 Watt-hours/cubic inch
84.2 Watt-hours/l
Specific Energy (20 hour rate)
13.6 Watt-hours/pound
30.1 Watt-hours/kg
Internal Resistance (Fully Charged Battery)
20 milliohms (approx.)

Absorbent Glass Mat (AGM) technology for superior performance.
Valve regulated, spill proof construction allows safe operation in any position.
Power/volume ratio yielding unrivaled energy density.
Rugged plastic case and cover
Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified.
U.L. recognized under file number MH 20845.CHARGING:Cycle Applications: Limit initial current to 960mA. Charge until battery voltage (under charge) reaches 9.60 to 10.00 volts at 68� F (20� C). Hold at 9.60 to 10.00 volts until current drops to approximately 32mA. Battery is fully charged under these conditions, and charger should either be disconnected or switched to "float" voltage.

"Float" or "Stand-by Service": Hold battery across constant voltage source of 9.00 to 9.20 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition.

Comment on Facebook

Product Reviews

Login or Register to write the first review.