|
POWER-SONIC PS-832
PS-832 — 8 Volt 3.2 AH Rechargeable SLA
Battery
Order Code: ps832
Rechargeable Sealed Lead-Acid Battery
| General
Specifications |
| Dimensions: |
| Length |
5.29 inches |
134 millimeters
|
| Width |
1.42 inches |
36 millimeters
|
| Height |
2.49 inches |
63 millimeters
|
| Height over Terminals
|
2.70 inches |
69 millimeters
|
| Approximate Weight
|
1.90 pounds |
0.86 kilograms
|
|
Terminals: |
Quick disconnect tabs (0.187" x
0.032") |
| Case: |
ABS Plastic |
|
Electrical Specifications |
| Nominal Voltage: |
8 Volts (4 cell in series)
|
| Nominal Capacity: |
| 20 hour rate
|
(160mA to 7.00 volts)
|
3.2 AH |
| 10 hour rate
|
(300mA to 7.00 volts)
|
3.0 AH |
| 5 hour rate |
(540mA to 6.80 volts)
|
2.7 AH |
| 1 hour rate |
(2100Ma to 6.00 volts)
|
2.0 AH |
| Energy Density (20 hour rate) |
1.37 Watt-hours/cubic inch
|
84.2 Watt-hours/l
|
| Specific Energy (20 hour rate) |
13.6 Watt-hours/pound
|
30.1 Watt-hours/kg
|
| Internal Resistance (Fully Charged
Battery) |
20 milliohms (approx.)
|
FEATURES:
Absorbent Glass Mat (AGM) technology for superior performance.
Valve regulated, spill proof construction allows safe operation in any position.
Power/volume ratio yielding unrivaled energy density.
Rugged plastic case and cover
Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified.
U.L. recognized under file number MH 20845.
CHARGING:
Cycle Applications: Limit
initial current to 960mA. Charge until battery voltage (under charge) reaches
9.60 to 10.00 volts at 68º F (20º C). Hold at 9.60 to 10.00 volts until current
drops to approximately 32mA. Battery is fully charged under these conditions,
and charger should either be disconnected or switched to "float" voltage.
"Float" or "Stand-by Service": Hold battery across
constant voltage source of 9.00 to 9.20 volts continuously. When held at this
voltage, the battery will seek its own current level and maintain itself in a
fully charged condition.
DOWNLOADS:
PS-832 — 8 Volt 3.2 AH
Rechargeable SLA Battery
Order Code: ps832
|
