• Function Generator:
  crystal-based stability
  standard waveforms: sine, square and triangle
  predefined library waveforms included: sine(x)/x, DCV, sweep, ...
• Oscilloscope:
  auto set-up function and X10 option
  pre-trigger function
  readouts: True RMS, dBV, dBm, p to p, Duty cycle, Frequency…
• Transient Recorder:
  automatic storage of data
  automatic recording for more than 1 year
  record and display of screens
• Bode Plotter:
  automated sync between oscilloscope and generator
  logarithmic scale option
  Volt or dB display scale
  phase plot option
• Spectrum analyzer:
  linear or logarithmic timescale
  operating principle: FFT (Fast Fourier Transform)
  FFT input channel: CH1 or CH2
  zoom function
• In the box:
  getting started manual
  USB PC Scope+generator unit
  USB cable
  software on CD

Specifications:

• General:
  • markers for: amplitude/voltage and frequency/time
  • input coupling: DC, AC and GND
  • Supply from USB port (500mA)
  • dimensions: 8.2 x 2.2 x 7"
• Function generator:
  • amplitude range: 100mVpp to 10Vpp @ 1KHz// 600ohm load / 0V offset
  • offset: from 0 to -5V or +5V max. (resolution 0.4% of full scale)
  • vertical resolution: 8 bits
  • square wave rise/fall time: 0.2µs
  • sample rate: 12.5MHz
  • typical sine wave distortion (THD): < 1%
  • output impedance: 50ohm
  • frequency range: from 0.005Hz to 500kHz
• Oscilloscope:
  • bandwidth: two channels DC to 12 MHz ±3dB
  • input impedance: 1 Mohm / 30pF
  • maximum input voltage: 30V (AC + DC)
  • time base: 0.1µs to 500ms per division
  • input range: 10mV to 3V/division
  • input sensitivity: 0.3mV display resolution
  • record length: 4K samples / channel
  • sampling frequency: 250Hz to 25MHz
• Transient recorder:
  • timescale: 20ms/Div to 2000s/Div
  • max record time: 9.4hour/screen
  • max. number of samples: 100/s
  • min. number of samples: 1 sample/20s
• Bode Plotter:
  • voltage range: 10mV, 30mV, 0.1V, 0.3V, 1V, 3V
  • frequency range: 1kHz , 10kHz, 100kHz, 500kHz
  • Frequency start: 10Hz, 100Hz, 1kHz, 10kHz
• Spectrum analyzer:
  • frequency range: 0 .. 120Hz to 12MHz
  • FFT resolution: 2048 lines
• Minimum system requirements:
  • IBM compatible PC
  • Windows™ 2000, XP, Vista *
  • SVGA display card (min.1024 x 768)
  • mouse
  • free USB port 1.1 or 2.0
  • CD Rom player

Downloads:

Electronics N More is your one stop source for: batteries, electronic components, test equipment, hand tools, audio, video, CCTV equipment, electronic DYI kits, electronic cleaners & chemicals, wire, cable N' More!